239/560KYMBW40IW534C3
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498125
Custom & Special Bearings · Dimensions on request
18.74 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498125 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 18.74 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 18.74 lb |
| Catalogue Ref. | QmCUlucmdr |
| # of Locking Screws | 28 |
| Application | Internal Shaft Locking Device |
| Contact Length (Dimension l) | 46.00 mm1.811 in |
| Coupling Size | SLD 1500 |
| Cubic inches | 6377.18913 mm³251.07044 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 190.50 mm7.500 in |
| Locking Screw Size (Dimension T) | M14 |
| Material | Silver/Metallic |
| Max. Transmissible Axial Force | 110326.00 lbf |
| Max. Transmissible Torque | 34477.00 ft·lb |
| Pressure on The Hub | 1Series 6451.00 psi |
| Pressure on The Shaft | 21546.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 138.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 249.50 mm9.823 in |
| Shaft Size | 7 1/2 in |
| Style | Self Releasing |
| Thrust Rings Width at Relaxed State (Dimension B) | 52.10 mm2.051 in |
| Tolerance of Hub Bore (T2) | -0 +0.0045 in |
| Tolerance of Shaft (T1) | +0 -0.0045 in |
| Total Width at Relaxed State (Dimension L) | 66.09 mm2.602 in |
| Type | Internal |
68514477183
📏 Dimensions on request
RA112RRB
📏 Dimensions on request
MSE507BRHSAFQRSS
📏 Dimensions on request
LSE615BXHSRSS
📏 Dimensions on request
68514439548
📏 Dimensions on request
LSM70BRHSRSS
📏 Dimensions on request
SNT 518-615 - 23218K - LO518
📏 Dimensions on request
LSE700BRHSRSS
📏 Dimensions on request
LSM70BXHS
📏 Dimensions on request
LSE308BXHSAFQHTPS
📏 Dimensions on request
68514442298
📏 Dimensions on request