SC Type Spacer Coupling Hubs with Rough Stock Bore, Short Length
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498107
Custom & Special Bearings · Dimensions on request
3.09 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498107 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 3.09 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 3.09 lb |
| Catalogue Ref. | pIJaqkaybd |
| # of Locking Screws | 15 |
| Application | Internal Shaft Locking Device |
| Contact Length (Dimension l) | 24.00 mm0.945 in |
| Coupling Size | SLD 1500 |
| Cubic inches | 920.17841 mm³36.22750 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 79.38 mm3.125 in |
| Locking Screw Size (Dimension T) | M10 |
| Material | Silver/Metallic |
| Max. Transmissible Axial Force | 31119.00 lbf |
| Max. Transmissible Torque | 4052.00 ft·lb |
| Pressure on The Hub | 18491.00 psi |
| Pressure on The Shaft | 27952.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 52.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 125.00 mm4.724 in |
| Shaft Size | 3 3/4 in |
| Style | Self Releasing |
| Thrust Rings Width at Relaxed State (Dimension B) | 28.00 mm1.102 in |
| Tolerance of Hub Bore (T2) | -0 +0.0035 in |
| Tolerance of Shaft (T1) | +0 -0.0035 in |
| Total Width at Relaxed State (Dimension L) | 38.00 mm1.496 in |
| Type | Internal |
1988 - 1932
📏 Dimensions on request
68514417087
📏 Dimensions on request
HSE515BXHSATL
📏 Dimensions on request
LSE808BXHSKPS
📏 Dimensions on request
HH224332 - HH224310-B
📏 Dimensions on request
V7040
📏 Dimensions on request
6224-NR-C3
📏 Dimensions on request
84527105128
📏 Dimensions on request
49585 - 49521
📏 Dimensions on request
69790497943
📏 Dimensions on request
X32320M
📏 Dimensions on request
LSM220BRHSDRSS
📏 Dimensions on request