LL687949 - LL687910
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498093
Custom & Special Bearings · Dimensions on request
1.Series 32 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498093 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.Series 32 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.Series 32 lb |
| Catalogue Ref. | znGnTk9a9u |
| # of Locking Screws | 15 |
| Application | Internal Shaft Locking Device |
| Contact Length (Dimension l) | 20.00 mm0.787 in |
| Coupling Size | SLD 1500 |
| Cubic inches | 358.30769 mm³14.10660 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 50.80 mm2.000 in |
| Locking Screw Size (Dimension T) | M8 |
| Material | Silver/Metallic |
| Max. Transmissible Axial Force | 20604.00 lbf |
| Max. Transmissible Torque | 1717.00 ft·lb |
| Pressure on The Hub | 20758.00 psi |
| Pressure on The Shaft | 34728.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 27.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 85.00 mm3.346 in |
| Shaft Size | 2 in |
| Style | Self Releasing |
| Thrust Rings Width at Relaxed State (Dimension B) | 24.00 mm0.945 in |
| Tolerance of Hub Bore (T2) | -0 +0.0025 in |
| Tolerance of Shaft (T1) | +0 -0.0025 in |
| Total Width at Relaxed State (Dimension L) | Series 32.00 mm1.260 in |
| Type | Internal |
V5025
📏 Dimensions on request
MSM240BXHFHTPS
📏 Dimensions on request
42368 - 42586
📏 Dimensions on request
LSM85BXHSNAATL
📏 Dimensions on request
68514442312
📏 Dimensions on request
SNW-3030 x 5 1/8
📏 Dimensions on request
HSM560BRHSATL
📏 Dimensions on request
69790413308
📏 Dimensions on request
SNW-3034 x 5 13/16
📏 Dimensions on request
X32305
📏 Dimensions on request
KIT.RWU55-E-343
📏 Dimensions on request