45X65X10-R2LS32-S
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498077
Custom & Special Bearings · Dimensions on request
55.12 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498077 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 55.12 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 55.12 lb |
| Catalogue Ref. | n01Ayb5r4T |
| # of Locking Screws | 36 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 72.00 mm2.835 in |
| Coupling Size | SLD1500 |
| Cubic inches | 24914.08760 mm³980.86959 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 320.00 mm12.598 in |
| Locking Screw Size (Dimension T) | M20 |
| Max. Transmissible Axial Force | 330891.00 lbf |
| Max. Transmissible Torque | 173696.00 ft·lb |
| Pressure on The Hub | 20305.00 psi |
| Pressure on The Shaft | 24511.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 435.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 405.00 mm15.945 in |
| Shaft Size | 320 x 405 mm |
| Style | Self Releasing |
| Thrust Rings Width at Relaxed State (Dimension B) | 78.00 mm3.071 in |
| Tolerance of Hub Bore (T2) | +0 -0.0055 in |
| Tolerance of Shaft (T1) | +0 -0.0055 in |
| Total Width at Relaxed State (Dimension L) | 97.99 mm3.858 in |
| Type | Internal |
LSE300BRHFATL
📏 Dimensions on request
68514449709
📏 Dimensions on request
69790497945
📏 Dimensions on request
MSM380BRHSKPS
📏 Dimensions on request
28995 - 28921
📏 Dimensions on request
MSE412BXHFKPS
📏 Dimensions on request
68514439546
📏 Dimensions on request
68514412322
📏 Dimensions on request
68514435686
📏 Dimensions on request
SNT 520-617 - 23220K - TSNG520
📏 Dimensions on request
69790498347
📏 Dimensions on request
HYDNUT800-HEAVY
📏 Dimensions on request