LSE406BRHSAFQ
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498054
Custom & Special Bearings · Dimensions on request
1.65 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498054 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.65 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.65 lb |
| Catalogue Ref. | vpZQEN7h7a |
| # of Locking Screws | 15 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 20.00 mm0.787 in |
| Coupling Size | SLD1500 |
| Cubic inches | 447.65915 mm³17.62438 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 65.00 mm2.559 in |
| Locking Screw Size (Dimension T) | M8 |
| Max. Transmissible Axial Force | 21443.00 lbf |
| Max. Transmissible Torque | 2286.00 ft·lb |
| Pressure on The Hub | 18855.00 psi |
| Pressure on The Shaft | 28137.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 28.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 95 mm3.74 in |
| Shaft Size | 65 x 95 mm |
| Style | Self Releasing |
| Thrust Rings Width at Relaxed State (Dimension B) | 24.00 mm0.945 in |
| Tolerance of Hub Bore (T2) | +0 -0.0030 in |
| Tolerance of Shaft (T1) | +0 -0.0030 in |
| Total Width at Relaxed State (Dimension L) | 32.00 mm1.260 in |
| Type | Internal |
KIT.KWVE20-B-900
📏 Dimensions on request
LSM75BRHSATL
📏 Dimensions on request
MSM75BRHTTRSS
📏 Dimensions on request
68514477188
📏 Dimensions on request
MSE215BXHSRSS
📏 Dimensions on request
69790499690
📏 Dimensions on request
68514413911
📏 Dimensions on request
68514436194
📏 Dimensions on request
68514445543
📏 Dimensions on request
SNT 519-616 - 21316K - LO616/ 2-3/4
📏 Dimensions on request
68514410632
📏 Dimensions on request
HSE608BXHSRSS
📏 Dimensions on request