68514441809
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498048
Custom & Special Bearings · Dimensions on request
1.43 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498048 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.43 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.43 lb |
| Catalogue Ref. | kKOTlN4L43 |
| # of Locking Screws | 12 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 20.00 mm0.787 in |
| Coupling Size | SLD1500 |
| Cubic inches | 279.08157 mm³10.98746 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 42.00 mm1.654 in |
| Locking Screw Size (Dimension T) | M8 |
| Max. Transmissible Axial Force | 17128.00 lbf |
| Max. Transmissible Torque | 1180.00 ft·lb |
| Pressure on The Hub | 20305.00 psi |
| Pressure on The Shaft | 34809.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 28.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 75.00 mm2.953 in |
| Shaft Size | 42 x 75 mm |
| Style | Self Releasing |
| Thrust Rings Width at Relaxed State (Dimension B) | 24.00 mm0.945 in |
| Tolerance of Hub Bore (T2) | +0 -0.0025 in |
| Tolerance of Shaft (T1) | +0 -0.0025 in |
| Total Width at Relaxed State (Dimension L) | 32.00 mm1.260 in |
| Type | Internal |
14X30X7-R2LS32-S
📏 Dimensions on request
495 VE R
📏 Dimensions on request
68514428877
📏 Dimensions on request
6212-ZZ-NR-C3
📏 Dimensions on request
DV-140
📏 Dimensions on request
MSE615BRHS
📏 Dimensions on request
LSM150BRHSHTPS
📏 Dimensions on request
68514449973
📏 Dimensions on request
M3015
📏 Dimensions on request
69790495958
📏 Dimensions on request