KIT.RWU45-E-410
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498032
Custom & Special Bearings · Dimensions on request
147.71 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498032 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 147.71 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 147.71 lb |
| Catalogue Ref. | yMJhjebZcZ |
| # of Locking Screws | 12 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 92.00 mm3.622 in |
| Coupling Size | SLD900 |
| Cubic inches | 31016.68293 mm³1221.12925 in3 |
| Disc Outside Diameter (Dimension D) | 405.00 mm15.945 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.335 in |
| Hub Outside Diameter (Dimension d) | 240.00 mm9.449 in |
| Locking Screw Size (Dimension T) | M20 |
| Locking Screws Size | M20 |
| Max. Diametrical Clearance (Dimension C) | 0.003 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 88507.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 88507 to 118010 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 361.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 6.693 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 405.00 mm15.945 in |
| Shaft Size | 240.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 109.00 mm4.291 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0028 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 122.00 mm4.803 in |
| Type | External |
69790498575
📏 Dimensions on request
MSM70BRHTPRSS
📏 Dimensions on request
G1102KLL
📏 Dimensions on request
68514455682
📏 Dimensions on request
23326EMW33W800C4
📏 Dimensions on request
SNT 520-617 - 23220K - VR520
📏 Dimensions on request
LSM190BXHFHTPS
📏 Dimensions on request
MSM600BXHS
📏 Dimensions on request
HSE515BXHSHTPS
📏 Dimensions on request
SNT 528 - 23228K - LO528/ 5
📏 Dimensions on request
LSE503BXHSNQKPS
📏 Dimensions on request
KIT.KWVE45-B-210
📏 Dimensions on request