MSE703BRHSAFQA
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498031
Custom & Special Bearings · Dimensions on request
119.05 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498031 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 119.05 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 119.05 lb |
| Catalogue Ref. | 4sNP0ebZcZ |
| # of Locking Screws | 15 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 88.00 mm3.465 in |
| Coupling Size | SLD900 |
| Cubic inches | 24189.49520 mm³952.34233 in3 |
| Disc Outside Diameter (Dimension D) | 370.00 mm14.567 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.315 in |
| Hub Outside Diameter (Dimension d) | 220.00 mm8.661 in |
| Locking Screw Size (Dimension T) | M16 |
| Locking Screws Size | M16 |
| Max. Diametrical Clearance (Dimension C) | 0.003 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 70068.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 70068 to 81132 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 184.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 6.299 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 370.00 mm14.567 in |
| Shaft Size | 220.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 104.00 mm4.094 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0028 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 114.00 mm4.488 in |
| Type | External |
K 80×88×38.5ZWANDGEDimensions on request
68514439266
📏 Dimensions on request
X32960M
📏 Dimensions on request
68514439199
📏 Dimensions on request
GN104KRRB
📏 Dimensions on request
SNT 517 - 22217K - LO517/ 3
📏 Dimensions on request
LSE300BRHSAFQAHTPS
📏 Dimensions on request
MSE2400BRHSHTPS
📏 Dimensions on request
68514417989
📏 Dimensions on request
68514410637
📏 Dimensions on request
31590 - 31521
📏 Dimensions on request