LSE2300BRHSRSS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498028
Custom & Special Bearings · Dimensions on request
79.37 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498028 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 79.37 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 79.37 lb |
| Catalogue Ref. | gxaVqg2J1x |
| # of Locking Screws | 10 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 71.00 mm2.795 in |
| Coupling Size | SLD900 |
| Cubic inches | 16206.06365 mm³638.03400 in3 |
| Disc Outside Diameter (Dimension D) | 330.00 mm12.992 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.295 in |
| Hub Outside Diameter (Dimension d) | 185.00 mm7.283 in |
| Locking Screw Size (Dimension T) | M16 |
| Locking Screws Size | M16 |
| Max. Diametrical Clearance (Dimension C) | 0.003 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 40566.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 40566 to 47942 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 184.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 5.315 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 330.00 mm12.992 in |
| Shaft Size | 185.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 86.00 mm3.386 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0028 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 96.00 mm3.780 in |
| Type | External |
HM237537 - HM237511
📏 Dimensions on request
LSM60BRHSNQATL
📏 Dimensions on request
SNT 516-613 - 22313K - VR613
📏 Dimensions on request
HYDNUT330.SEAL
📏 Dimensions on request
992550
📏 Dimensions on request
HSM500BRHSHTPS
📏 Dimensions on request
MSM240BXHSHTPS
📏 Dimensions on request
HM807049A - HM807010
📏 Dimensions on request
68514436631
📏 Dimensions on request
HH249949H - HH249910CD
📏 Dimensions on request
MSE908BXHFRSS
📏 Dimensions on request
6321-2RZ-C3
📏 Dimensions on request