TKVD25-ADB
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498025
Custom & Special Bearings · Dimensions on request
33.07 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498025 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 33.07 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 33.07 lb |
| Catalogue Ref. | mF89EA4Q49 |
| # of Locking Screws | 12 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 50.00 mm1.969 in |
| Coupling Size | SLD900 |
| Cubic inches | 7619.58546 mm³299.98368 in3 |
| Disc Outside Diameter (Dimension D) | 265.00 mm10.433 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.236 in |
| Hub Outside Diameter (Dimension d) | 155.00 mm6.102 in |
| Locking Screw Size (Dimension T) | M12 |
| Locking Screws Size | M12 |
| Max. Diametrical Clearance (Dimension C) | 0.003 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 14751.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 14751 to 19177 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 74.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 4.134 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 265.00 mm10.433 in |
| Shaft Size | 155.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 62.00 mm2.441 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0025 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 70.00 mm2.756 in |
| Type | External |
MSM85BRHTPRSS
📏 Dimensions on request
017PKG
📏 Dimensions on request
239/800YMBW509C08
📏 Dimensions on request
W30
📏 Dimensions on request
LSM120BRHSKPS
📏 Dimensions on request
68514436116
📏 Dimensions on request
KIT.RWU45-E-420
📏 Dimensions on request
HYDNUT385.SEAL
📏 Dimensions on request
NRB1,5X11,8-G2
📏 Dimensions on request
LSM230BXHS
📏 Dimensions on request
MSE2100BXHSHTPS
📏 Dimensions on request