HSM400BXHSRSS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498024
Custom & Special Bearings · Dimensions on request
22.05 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498024 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 22.05 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 22.05 lb |
| Catalogue Ref. | bZ5LlW4Q49 |
| # of Locking Screws | Series 10 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 46.00 mm1.811 in |
| Coupling Size | SLD900 |
| Cubic inches | 5575.18133 mm³219.49533 in3 |
| Disc Outside Diameter (Dimension D) | 230.00 mm9.055 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.276 in |
| Hub Outside Diameter (Dimension d) | 140.00 mm5.512 in |
| Locking Screw Size (Dimension T) | M12 |
| Locking Screws Size | M12 |
| Max. Diametrical Clearance (Dimension C) | 0.002 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 11063.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 11063 to 14751 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 74.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 3.740 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 230.00 mm9.055 in |
| Shaft Size | 140.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 60.00 mm2.362 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0025 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 68.00 mm2.677 in |
| Type | External |
Y32209M
📏 Dimensions on request
68514460057
📏 Dimensions on request
LSM130BXHFHTPS
📏 Dimensions on request
20X35X5.5-RLS35-S
📏 Dimensions on request
68514458582
📏 Dimensions on request
LSE2300BXHSKPS
📏 Dimensions on request
68514450012
📏 Dimensions on request
68514411727
📏 Dimensions on request
68514411740
📏 Dimensions on request
MSM150BRHTPRSS
📏 Dimensions on request
MSM60BRHFRSS
📏 Dimensions on request