G1108KLLB
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498022
Custom & Special Bearings · Dimensions on request
13.01 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498022 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 13.01 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 13.01 lb |
| Catalogue Ref. | 6uVWx0d7en |
| # of Locking Screws | Series 9 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 39.00 mm1.535 in |
| Coupling Size | SLD900 |
| Cubic inches | 3122.87593 mm³122.94787 in3 |
| Disc Outside Diameter (Dimension D) | 184.99 mm7.283 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.217 in |
| Hub Outside Diameter (Dimension d) | 110.00 mm4.331 in |
| Locking Screw Size (Dimension T) | M10 |
| Locking Screws Size | M10 |
| Max. Diametrical Clearance (Dimension C) | 0.002 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 5310.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 5310 to 8113 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 44.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 2.953 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 185.00 mm7.283 in |
| Shaft Size | 110.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 50.00 mm1.969 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0021 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 57.00 mm2.244 in |
| Type | External |
ZS2SN408FYHDimensions on request
KIT.KWVE35-B-220
📏 Dimensions on request
68514412329
📏 Dimensions on request
68514446758
📏 Dimensions on request
LSE215BXHSAFQA-4BATL
📏 Dimensions on request
84527105222
📏 Dimensions on request
69790498105
📏 Dimensions on request
HSM135BXHSRSS
📏 Dimensions on request
68514443161
📏 Dimensions on request
MSM130BXHSATL
📏 Dimensions on request
G1104KRR
📏 Dimensions on request
68514415367
📏 Dimensions on request