68514417887
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498021
Custom & Special Bearings · Dimensions on request
Series 10.14 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498021 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of Series 10.14 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 10.14 lb |
| Catalogue Ref. | Gv4lOk2k12 |
| # of Locking Screws | Series 12 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 34.00 mm1.339 in |
| Coupling Size | SLD900 |
| Cubic inches | 2625.82740 mm³103.37903 in3 |
| Disc Outside Diameter (Dimension D) | 170.00 mm6.693 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.197 in |
| Hub Outside Diameter (Dimension d) | 100.00 mm3.937 in |
| Locking Screw Size (Dimension T) | M8 |
| Locking Screws Size | M10 |
| Max. Diametrical Clearance (Dimension C) | 0.002 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 5089.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 5089 to 6638 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 22.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 2.756 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 170.00 mm6.693 in |
| Shaft Size | 100.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 44.00 mm1.732 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0021 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 49.50 mm1.949 in |
| Type | External |
MSE908BRHFHTPS
📏 Dimensions on request
6016-2RZ-NR
📏 Dimensions on request
LSE300BXHSAFQA-4BRSS
📏 Dimensions on request
LSM140BXHSAFQAHTPS
📏 Dimensions on request
6475 - 6420-B
📏 Dimensions on request
MSE912BRHSRSS
📏 Dimensions on request
68514458589
📏 Dimensions on request
LSE304BXHFRSS
📏 Dimensions on request
SSUCPA205
📏 Dimensions on request
SSUCP209-26
📏 Dimensions on request
SSUCP2103-31
📏 Dimensions on request
SSUCPA204-12
📏 Dimensions on request
SSUCP209
📏 Dimensions on request