68514456692
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498020
Custom & Special Bearings · Dimensions on request
7.28 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498020 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 7.28 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 7.28 lb |
| Catalogue Ref. | Kv5Aru2k12 |
| # of Locking Screws | Series 10 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 30.00 mm1.181 in |
| Coupling Size | SLD900 |
| Cubic inches | 2016.22541 mm³79.37895 in3 |
| Disc Outside Diameter (Dimension D) | 154.99 mm6.102 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.177 in |
| Hub Outside Diameter (Dimension d) | 90.00 mm3.543 in |
| Locking Screw Size (Dimension T) | M8 |
| Locking Screws Size | M8 |
| Max. Diametrical Clearance (Dimension C) | 0.002 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 3467.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 3467 to 5310 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 22.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 2.559 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 129.59 mm5.102 in |
| Shaft Size | 90.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 39.00 mm1.535 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0021 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 45.00 mm1.772 in |
| Type | External |
XS2P409FYHDimensions on request
LSM140BRHTPHTPS
📏 Dimensions on request
68514476277
📏 Dimensions on request
SNT 524-620 - 21320K - TSNG620
📏 Dimensions on request
68514431183
📏 Dimensions on request
HSE800BRHSATL
📏 Dimensions on request
MSM360BXHSHTPS
📏 Dimensions on request
LSE900BXHFKPS
📏 Dimensions on request
LSE403BRHSAFQATL
📏 Dimensions on request
100165
📏 Dimensions on request
LSM125BRHSNQRSS
📏 Dimensions on request
68514425104
📏 Dimensions on request
67875 - 67820
📏 Dimensions on request