MSM305BXHFKPS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498019
Custom & Special Bearings · Dimensions on request
4.85 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498019 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 4.85 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 4.85 lb |
| Catalogue Ref. | SOo6UuaBbg |
| # of Locking Screws | 7 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 25.00 mm0.984 in |
| Coupling Size | SLD900 |
| Cubic inches | 989.11370 mm³38.94148 in3 |
| Disc Outside Diameter (Dimension D) | 145.01 mm5.709 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.138 in |
| Hub Outside Diameter (Dimension d) | 80.00 mm3.150 in |
| Locking Screw Size (Dimension T) | M8 |
| Locking Screws Size | M8 |
| Max. Diametrical Clearance (Dimension C) | 0.002 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 2360.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 2360 to 3393 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 22.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 2.362 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 145.00 mm5.709 in |
| Shaft Size | 80.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | Series 32.00 mm1.260 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0018 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 38.00 mm1.496 in |
| Type | External |
HYDNUT65.SEAL
📏 Dimensions on request
LSE300BRHSAFQ-4BKPS
📏 Dimensions on request
68514476854
📏 Dimensions on request
G1205KLLB
📏 Dimensions on request
68514476842
📏 Dimensions on request
68514425091
📏 Dimensions on request
GN303KRRB
📏 Dimensions on request
68514439419
📏 Dimensions on request
LSM150BRHTTHTPS
📏 Dimensions on request
M249749H - M249710X
📏 Dimensions on request