X32238 - Y32238
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498016
Custom & Special Bearings · Dimensions on request
2.87 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498016 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 2.87 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 2.87 lb |
| Catalogue Ref. | bho3CG5Y5y |
| # of Locking Screws | Series 10 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 23.00 mm0.906 in |
| Coupling Size | SLD900 |
| Cubic inches | 697.31199 mm³27.45323 in3 |
| Disc Outside Diameter (Dimension D) | 110.01 mm4.331 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.138 in |
| Hub Outside Diameter (Dimension d) | 62.00 mm2.441 in |
| Locking Screw Size (Dimension T) | M6 |
| Locking Screws Size | M6 |
| Max. Diametrical Clearance (Dimension C) | 0.001 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 1328.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 1328 to 1770 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 9.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 1.890 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 110.00 mm4.331 in |
| Shaft Size | 62.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 30.00 mm1.181 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0018 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 34.00 mm1.339 in |
| Type | External |
XDS2SN415-44FYHDimensions on request
69790498413
📏 Dimensions on request
LSE300BRHSAFQATL
📏 Dimensions on request
MSE312BRHSATL
📏 Dimensions on request
NRB2X9,8-G2
📏 Dimensions on request
862 - 854X
📏 Dimensions on request
68514412332
📏 Dimensions on request
MSM45BRHSHTPS
📏 Dimensions on request
LSE403BRHS
📏 Dimensions on request
G1103KRRB
📏 Dimensions on request
LSM200BXHSDRSS
📏 Dimensions on request
69790498556
📏 Dimensions on request
68514427969
📏 Dimensions on request