Name: TIMKEN 69790498007
Brand: TIMKEN
SKU: 30oagg9c9y

TIMKEN 69790498007

Custom & Special Bearings · Dimensions on request

0.Series 33 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 69790498007 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.Series 33 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Custom & Special Bearings

Type

Custom & Special Bearings

Dimensions (d × D × B)

Dimensions on request

Weight

0.Series 33 lb

Catalogue Ref.

30oagg9c9y

# of Locking Screws

Application

External Shaft Locking Device

Collar Material

Silver/Metallic

Contact Length (Dimension l)

9.00 mm0.354 in

Coupling Size

SLD900

Cubic inches

Series 33.59575 mm³1.32267 in3

Disc Outside Diameter (Dimension D)

38.00 mm1.496 in

Features

Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer

Gap Width at Relaxed State (Dimension e)

0.039 in

Hub Outside Diameter (Dimension d)

14.00 mm0.551 in

Locking Screw Size (Dimension T)

Locking Screws Size

Max. Diametrical Clearance (Dimension C)

0.001 in

Max. Transmissible Torque (at low end of shaft diameter range)

22.00 ft·lb

Max. Transmissible Torque (min to max shaft diameter)

Series 22 to 37 ft·lb