SNT 517 - 22217K - TA517
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498001
Custom & Special Bearings · Dimensions on request
21.16 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498001 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 21.16 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 21.16 lb |
| Catalogue Ref. | MrMVfua5aD |
| # of Locking Screws | 14 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 104.00 mm4.094 in |
| Coupling Size | SLD 2600 |
| Cubic inches | 7273.39534 mm³286.35415 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 138.13 mm5.438 in |
| Locking Screw Size (Dimension T) | M14 |
| Max. Transmissible Axial Force | 189613.00 lbf |
| Max. Transmissible Torque | 41478.00 ft·lb |
| Pressure on The Hub | 17618.00 psi |
| Pressure on The Shaft | 30738.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 169.60 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 190.00 mm7.480 in |
| Shaft Size | 5 7/16 in |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 116.00 mm4.567 in |
| Tolerance of Hub Bore (T2) | -0 +0.0028 in |
| Tolerance of Shaft (T1) | +0 -0.0025 in |
| Total Width at Relaxed State (Dimension L) | 130.00 mm5.118 in |
| Type | Internal |
K 35×39×25.5ZWTNANDGEDimensions on request24096CAK30+AH24096NSKDimensions on request
48X65X10-R2LS32-S
📏 Dimensions on request
HM807048 - HM807011
📏 Dimensions on request
MOGE-AS1-STI-10
📏 Dimensions on request
X33012 - Y33012
📏 Dimensions on request
MSM440BRHSATL
📏 Dimensions on request
LSE2400BXHSHTPS
📏 Dimensions on request
LSM35BRHSRSS
📏 Dimensions on request
75X100X10-R2LS32-S
📏 Dimensions on request
LSE212BXHSAFQRSS
📏 Dimensions on request
100X120X13-R2LS32-S
📏 Dimensions on request