69790412128
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790497997
Custom & Special Bearings · Dimensions on request
14.99 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790497997 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 14.99 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 14.99 lb |
| Catalogue Ref. | NLPeaK7z7w |
| # of Locking Screws | 14 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 90.00 mm3.543 in |
| Coupling Size | SLD 2600 |
| Cubic inches | 4725.69673 mm³186.05105 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 112.73 mm4.438 in |
| Locking Screw Size (Dimension T) | M12 |
| Max. Transmissible Axial Force | 138363.00 lbf |
| Max. Transmissible Torque | 25Series 223.00 ft·lb |
| Pressure on The Hub | 17468.00 psi |
| Pressure on The Shaft | 32876.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 106.90 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 165 mm6.496 in |
| Shaft Size | 4 7/16 in |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 100.00 mm3.937 in |
| Tolerance of Hub Bore (T2) | -0 +0.0025 in |
| Tolerance of Shaft (T1) | +0 -0.0021 in |
| Total Width at Relaxed State (Dimension L) | 111.99 mm4.409 in |
| Type | Internal |
MSE800BXHSAFQARSS
📏 Dimensions on request
68514476363
📏 Dimensions on request
68514437918
📏 Dimensions on request
LSM80BRHSNQAATL
📏 Dimensions on request
6320-2RS
📏 Dimensions on request
P205K FS50000
📏 Dimensions on request
LM104949P - LM104911P
📏 Dimensions on request
X33205
📏 Dimensions on request
2875 - 2821
📏 Dimensions on request