LSE715BXHSAFQ
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790497959
Custom & Special Bearings · Dimensions on request
44.09 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790497959 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 44.09 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 44.09 lb |
| Catalogue Ref. | jy11JqdheA |
| # of Locking Screws | 16 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 136.00 mm5.354 in |
| Coupling Size | SLD2600 |
| Cubic inches | 16973.78848 mm³668.25939 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 200.00 mm7.874 in |
| Locking Screw Size (Dimension T) | M16 |
| Max. Transmissible Axial Force | 302294.00 lbf |
| Max. Transmissible Torque | 94219.00 ft·lb |
| Pressure on The Hub | 15443.00 psi |
| Pressure on The Shaft | 26253.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 261.80 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 260.00 mm10.236 in |
| Shaft Size | 200 x 260 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 146.00 mm5.748 in |
| Tolerance of Hub Bore (T2) | -0 +0.0032 in |
| Tolerance of Shaft (T1) | +0 -0.0028 in |
| Total Width at Relaxed State (Dimension L) | 162.00 mm6.378 in |
| Type | Internal |
MSM320BRHS
📏 Dimensions on request
LSM35BRHS
📏 Dimensions on request
MSE212BRHSKPS
📏 Dimensions on request
68514437358
📏 Dimensions on request
LSM110BXHSRSS
📏 Dimensions on request
68514457622
📏 Dimensions on request
HYDNUT75.SEAL
📏 Dimensions on request
22778 - 22720
📏 Dimensions on request
389 - 382A
📏 Dimensions on request
LSM90BXHSNQBRSS
📏 Dimensions on request
LFS86-CE
📏 Dimensions on request
68514436203
📏 Dimensions on request