68514412589
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790497955
Custom & Special Bearings · Dimensions on request
25.35 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790497955 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 25.35 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 25.35 lb |
| Catalogue Ref. | fKKOuA8E8R |
| # of Locking Screws | 16 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 108.00 mm4.252 in |
| Coupling Size | SLD2600 |
| Cubic inches | 8886.58571 mm³349.86558 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 160.00 mm6.299 in |
| Locking Screw Size (Dimension T) | M14 |
| Max. Transmissible Axial Force | 223177.00 lbf |
| Max. Transmissible Torque | 54916.00 ft·lb |
| Pressure on The Hub | 17542.00 psi |
| Pressure on The Shaft | 30324.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 169.60 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 210.00 mm8.268 in |
| Shaft Size | 160 x 210 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 116.00 mm4.567 in |
| Tolerance of Hub Bore (T2) | -0 +0.0028 in |
| Tolerance of Shaft (T1) | +0 -0.0025 in |
| Total Width at Relaxed State (Dimension L) | 130.00 mm5.118 in |
| Type | Internal |
23164CAK+AH3164NSKDimensions on request
LL428349 - LL428310
📏 Dimensions on request
LSM130BRHTPRSS
📏 Dimensions on request
HSM400BRHSHTPS
📏 Dimensions on request
68514437915
📏 Dimensions on request
84527105112
📏 Dimensions on request
SNT 517 - 22217K - TA517/ 2-15/16
📏 Dimensions on request
HSM135BRHSATL
📏 Dimensions on request
622X - 612
📏 Dimensions on request
HSM580BXHSRSS
📏 Dimensions on request
HSM420BXHSRSS
📏 Dimensions on request