SNT 532 - 22232K - TA532/ 5-7/16
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790497951
Custom & Special Bearings · Dimensions on request
18.96 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790497951 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 18.96 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 18.96 lb |
| Catalogue Ref. | GW0hvi685K |
| # of Locking Screws | 14 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 92.00 mm3.622 in |
| Coupling Size | SLD2600 |
| Cubic inches | 4725.69673 mm³186.05105 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 120.00 mm4.724 in |
| Locking Screw Size (Dimension T) | M12 |
| Max. Transmissible Axial Force | 148816.00 lbf |
| Max. Transmissible Torque | 26853.00 ft·lb |
| Pressure on The Hub | 17088.00 psi |
| Pressure on The Shaft | 30880.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 106.90 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 165 mm6.496 in |
| Shaft Size | 120 x 165 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 100.00 mm3.937 in |
| Tolerance of Hub Bore (T2) | -0 +0.0025 in |
| Tolerance of Shaft (T1) | +0 -0.0021 in |
| Total Width at Relaxed State (Dimension L) | 111.99 mm4.409 in |
| Type | Internal |
LSM90BRHSHTPS
📏 Dimensions on request
69790491420
📏 Dimensions on request
68514439178
📏 Dimensions on request
HSM125BXHS
📏 Dimensions on request
EE231400 - 232000-B
📏 Dimensions on request
KIT.RWU25-E-550
📏 Dimensions on request
69790496454
📏 Dimensions on request
HSM120BXHS
📏 Dimensions on request
69790498361
📏 Dimensions on request
038BULK
📏 Dimensions on request
G1207KRRB
📏 Dimensions on request