HSM250BRHFRSS
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790492885
Ball Bearing Units · Dimensions on request
27.50 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790492885 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 27.50 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 27.50 lb |
| Catalogue Ref. | 8rNIjK4o3B |
| AISE Motor Frame Size | 603/604 & 803/804 |
| Bore Size (Dimension TB) | 1.9980 to 1.9990 in |
| Color | Metallic |
| Coupling Type | Gear |
| Cubic inches | 110.93915 in3 |
| Dimension FD | 239.78 mm9.44 in |
| Dimension HD | 143.00 mm5.630 in |
| Features | Patented Vari-Crown® tooth form for long life Standard 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards Long Universal Hub used for AISE Motor Frames |
| Hub Material | AISI 1045 |
| Hub Style | Exposed Bolt |
| Keyway Size (W x D) | 1/2 x 1/4 in |
| Max. Bore (Dimensions ID1/ID2) | 107 mm4.000 in |
| Max. Speed (Balanced) | 6000.00 rpm |
| Max. Speed (Unbalanced) | 4000 rpm |
| Nominal Torque | 94500 in·lb |
| Notes | Counterbore is required for hub size 1.5. Bore taper is 1-1/4 inch per foot on diameter. Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1.5 through 5.5. Puller Holes are standard on sizes 4 through 6. Puller Holes are available for sizes 1.5 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section.1/4 inch hub standoff. |
| Set Screw Style Coupling Size (Dimension T) | No Setscrew |
| Size | 3 |
| Style | Mill Motor Hub Bored |
| Type | Gear Coupling Hubs |
SAF4535ANDGEDimensions on request
YAS 2 15/16
📏 Dimensions on request
UKFC206 - H2306
📏 Dimensions on request
SUCSFL205-16/F
📏 Dimensions on request
SAF 23056K 10-1/2
📏 Dimensions on request
SUCATBY206/F
📏 Dimensions on request
V160C80-80
📏 Dimensions on request
SUCPLF209-27/FVSL613
📏 Dimensions on request
69790408637
📏 Dimensions on request
QMFX08J107S
📏 Dimensions on request
MSE503BXHFATL
📏 Dimensions on request
69790400404
📏 Dimensions on request
VAS 45
📏 Dimensions on request