68514411514
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790491097
Custom & Special Bearings · Dimensions on request
69.Series 10 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790491097 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 69.Series 10 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 69.Series 10 lb |
| Catalogue Ref. | PIaCMh8T9a |
| Bore Type | Rough Stock Bore |
| Center Line to Center Line of Teeth | 228.60 mm9.000 in |
| Color | Metallic |
| Complete Coupling Weight | 240.00 lb |
| Coupling Type | Gear |
| Cubic inches | 224.34750 in3 |
| Dimension D | 263.65 mmSeries 10.380 in |
| Dimension FD | 346.20 mm13.63 in |
| Dimension HD | 165.Series 10 mm6.5 in |
| Dimension W | 63.50 mm2.500 in |
| Distance between Shaft Ends (Dimension BSE) | 7.87 mm0.31 in |
| Features | All-Metal Labyrinth SealsAISI 4140 Alloy Steel ConstructionPatented Vari-Crown® tooth form for long lifeStandard Series 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenanceProvides parallel, angular misalignment and end floatFlex Half coupling interchangeable with industry standards |
| Hub Material | All Metal |
| Hub Style | Exposed Bolt |
| Length thru Bore | 134.87 mm5.310 in |
| Max. Angular Misalignment | 1.50o per Gear Mesh |
| Max. Bore (Dimensions ID1/ID2) | 38 mm1.5 in |
| Max. Speed (Balanced) | 7155.00 rpm |
| Max. Speed (Unbalanced) | 4770.00 rpm |
| Nominal Torque | 393800.00 in·lb |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through Series 5. Puller Holes are standard on sizes 4 through 7. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section. |
| Overall Length | 289.05 mm11.380 in |
| Parallel Misalignment | 0.079 in |
| Size | 4 1/2 |
| Style | Unbored |
| Type | Gear Coupling Hubs |
G1108KPPB3
📏 Dimensions on request
MSM80BXHSATL
📏 Dimensions on request
MSE600BXHSAFQATL
📏 Dimensions on request
LSM110BRHSKPS
📏 Dimensions on request
LSM105BXHS
📏 Dimensions on request
68514438200
📏 Dimensions on request
LSM140BRHFHTPS
📏 Dimensions on request
MSE607BXHS
📏 Dimensions on request
38X54X10-RLS35-S
📏 Dimensions on request
MSE412BRHFATL
📏 Dimensions on request
LSM160ABXHS
📏 Dimensions on request
68514436365
📏 Dimensions on request
X30308M - Y30308M
📏 Dimensions on request