HYDNUT570.SEAL
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790491092
Custom & Special Bearings · Dimensions on request
7.00 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790491092 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 7.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 7.00 lb |
| Catalogue Ref. | yzehEH6n63 |
| Bore Type | Rough Stock Bore |
| Center Line to Center Line of Teeth | 101.60 mm4.000 in |
| Color | Metallic |
| Complete Coupling Weight | 29.Series 10 lb |
| Coupling Type | Gear |
| Cubic inches | 20.23834 in3 |
| Dimension D | 124.71 mm4.910 in |
| Dimension FD | 177.80 mm7.00 in |
| Dimension HD | 73.15 mm2.880 in |
| Dimension W | 38.Series 10 mm1.500 in |
| Distance between Shaft Ends (Dimension BSE) | 3.30 mm0.13 in |
| Features | All-Metal Labyrinth SealsAISI 4140 Alloy Steel ConstructionPatented Vari-Crown® tooth form for long lifeStandard Series 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenanceProvides parallel, angular misalignment and end floatFlex Half coupling interchangeable with industry standards |
| Hub Material | All Metal |
| Hub Style | Exposed Bolt |
| Length thru Bore | 61.98 mm2.440 in |
| Max. Angular Misalignment | 1.50o per Gear Mesh |
| Max. Bore (Dimensions ID1/ID2) | 12.00 mm0.500 in |
| Max. Speed (Balanced) | 13950.00 rpm |
| Max. Speed (Unbalanced) | 9300.00 rpm |
| Nominal Torque | 35500.00 in·lb |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through Series 5. Puller Holes are standard on sizes 4 through 7. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section. |
| Overall Length | 131.83 mm5.190 in |
| Parallel Misalignment | 0.035 in |
| Size | 2 |
| Style | Unbored |
| Type | Gear Coupling Hubs |
LSE303BXHSAFQRSS
📏 Dimensions on request
68514439547
📏 Dimensions on request
6208-RS-C3
📏 Dimensions on request
68514444600
📏 Dimensions on request
LSM80BRHSNAATL
📏 Dimensions on request
LSM160BXHFRSS
📏 Dimensions on request
SNT 530 - 23230K - TA530
📏 Dimensions on request
LSE407BXHSRSS
📏 Dimensions on request
LSM40BXHSRSS
📏 Dimensions on request
69790405221
📏 Dimensions on request
68514419841
📏 Dimensions on request
68514457607
📏 Dimensions on request