RSA 1 7/16
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790414566
Ball Bearing Units · Dimensions on request
118.09 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790414566 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 118.09 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 118.09 lb |
| Catalogue Ref. | kCtqN8cTe6 |
| Bore Size | Series 8 in |
| Color | Metallic |
| Complete Coupling Weight | 650.00 lb |
| Coupling Type | Gear |
| Cubic inches | 979.97250 in3 |
| Dimension AD | 431.80 mm17.000 in |
| Dimension D | 355.60 mm14.000 in |
| Dimension FD | 457.20 mm18.00 in |
| Dimension HD | 292.Series 10 mm11.50 in |
| Distance between Shaft Ends (Dimension BSE) | 7.87 mm0.310 in |
| Features | Molded seals maintain proper lubricant retention during misalignment conditionsAISI 4140 Alloy Steel Construction Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end floatFlex Half coupling interchangeable with industry standards |
| Hub Material | Alloy Steel |
| Hub Style | Exposed Bolt |
| Keyway Size (W x D) | 2 x 3/4 in |
| Length Through Bore (LTB) | 188.21 mm7.41 in |
| Max. Angular Misalignment | 1.50o per Gear Mesh |
| Max. Bore (Dimensions ID1/ID2) | 225 mmSeries 8.250 in |
| Max. Speed (Balanced) | 3150 rpm |
| Max. Speed (Unbalanced) | 2100 rpm |
| Nominal Torque | 99110 N·m877100 in·lb |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through 7. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section. |
| Overall Length | 384.30 mm15.130 in |
| Parallel Misalignment | 0.120 in |
| Set Screw Style Coupling Size (Dimension T) | No Setscrew |
| Size | 6 |
| Style | Bored |
| Type | Gear Coupling Hubs |
| Width | 11.500 in |
SUCBF208-25/FVSL613
📏 Dimensions on request
SAS 1 5/8
📏 Dimensions on request
LSM85BRHFRSS
📏 Dimensions on request
UCST201-8
📏 Dimensions on request
UCC210-32
📏 Dimensions on request
UELP211
📏 Dimensions on request
E-4BF-TRB-3-ECO
📏 Dimensions on request
SD 556
📏 Dimensions on request
TAPH17K075S
📏 Dimensions on request
E-4BF-TRB-1 1/2-ECO
📏 Dimensions on request
EUC-D
📏 Dimensions on request
SUCATBYM204/F
📏 Dimensions on request
SUCBFB210-31/FVSL613
📏 Dimensions on request