SUCPLP205/F
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790411735
Ball Bearing Units · Dimensions on request
149.00 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790411735 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 149.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 149.00 lb |
| Catalogue Ref. | 8jXHnO8g8n |
| Bore Size | 7 in |
| Color | Metallic |
| Complete Coupling Weight | 520.00 lb |
| Coupling Type | Gear |
| Cubic inches | 291.94750 in3 |
| Dimension AD | 365.252 mm14.38 in |
| Dimension D | 323.09 mm12.72 in |
| Dimension FD | 425.45 mm16.75 in |
| Dimension HD | 266.70 mmSeries 10.50 in |
| Distance between Shaft Ends (Dimension BSE) | 7.87 mm0.310 in |
| Features | Molded seals maintain proper lubricant retention during misalignment conditionsAISI 4140 Alloy Steel Construction Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end floatFlex Half coupling interchangeable with industry standards |
| Hub Material | Alloy Steel |
| Hub Style | Exposed Bolt |
| Keyway Size (W x D) | 1 3/4 x 3/4 in |
| Length Through Bore (LTB) | 175.51 mm6.910 in |
| Max. Angular Misalignment | 1.50o per Gear Mesh |
| Max. Bore (Dimensions ID1/ID2) | Series 202 mm7.500 in |
| Max. Speed (Balanced) | 3300 rpm |
| Max. Speed (Unbalanced) | 2200 rpm |
| Nominal Torque | 75790 N·m670700 in·lb |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through 7. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section. |
| Overall Length | 358.90 mm14.13 in |
| Parallel Misalignment | 0.220 in |
| Set Screw Style Coupling Size (Dimension T) | No Setscrew |
| Size | Series 5 1/2 |
| Style | Bored |
| Type | Gear Coupling Hubs |
| Width | Series 10.500 in |
UCF212-38
📏 Dimensions on request
TCJ1 15/16
📏 Dimensions on request
QAAFY15A300S
📏 Dimensions on request
QVVC19V303S
📏 Dimensions on request
69790400133
📏 Dimensions on request
SNT 511-609 - 21309K - TSNG609
📏 Dimensions on request
GYA110RR
📏 Dimensions on request
QVFL19V090S
📏 Dimensions on request
TTU-65-18
📏 Dimensions on request
SAF 23056K 9-15/16
📏 Dimensions on request
GY1203KRRB SGT
📏 Dimensions on request
GY1201KRRB
📏 Dimensions on request
QMMC11J055S
📏 Dimensions on request