68514436157
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790410771
Custom & Special Bearings · Dimensions on request
17.64 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790410771 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 17.64 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 17.64 lb |
| Catalogue Ref. | Rc5I4ideex |
| # of Locking Screws | 16 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 90.00 mm3.543 in |
| Coupling Size | SLD1900 |
| Cubic inches | 5907.92479 mm³232.59546 in3 |
| Diameter to Flange (Dimension D1) | 208.00 mmSeries 8.189 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 130.00 mm5.118 in |
| Locking Screw Size (Dimension T) | M12 |
| Max. Transmissible Axial Force | 94577.00 lbf |
| Max. Transmissible Torque | 18618.00 ft·lb |
| Pressure on The Hub | 10008.00 psi |
| Pressure on The Shaft | 9427.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 107.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 165 mm6.496 in |
| Shaft Size | 130 x 165 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 128.00 mm5.039 in |
| Tolerance of Hub Bore (T2) | -0 +0.0025 in |
| Tolerance of Shaft (T1) | +0 -0.0021 in |
| Total Width at Relaxed State (Dimension L) | 140.00 mm5.512 in |
| Type | Internal |
68514462054
📏 Dimensions on request
FWF-566133Z
📏 Dimensions on request
MSM140BRHTPHTPS
📏 Dimensions on request
MSM230BXHSKPS
📏 Dimensions on request
LSE303BRHSATL
📏 Dimensions on request
92X120X13-RLS35-S
📏 Dimensions on request
68514421949
📏 Dimensions on request
68514436153
📏 Dimensions on request
LSM400BRHSKPS
📏 Dimensions on request
LSM155BRHS
📏 Dimensions on request
MSE207BRHSRSS
📏 Dimensions on request
HSM580BRHSHTPS
📏 Dimensions on request
69790493107
📏 Dimensions on request