MSM305BXHFRSS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790410765
Custom & Special Bearings · Dimensions on request
176.37 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790410765 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 176.37 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 176.37 lb |
| Catalogue Ref. | cIEEUL979r |
| # of Locking Screws | Series 44 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 96.00 mm3.780 in |
| Coupling Size | SLD1500 |
| Cubic inches | 71490.77293 mm³2814.59736 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 500.00 mm19.685 in |
| Locking Screw Size (Dimension T) | M24 |
| Max. Transmissible Axial Force | 689534.00 lbf |
| Max. Transmissible Torque | 565563.00 ft·lb |
| Pressure on The Hub | 20305.00 psi |
| Pressure on The Shaft | 24656.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 885.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 605.00 mm23.819 in |
| Shaft Size | 500 x 605 mm |
| Style | Self Releasing |
| Thrust Rings Width at Relaxed State (Dimension B) | 102.00 mm4.016 in |
| Tolerance of Hub Bore (T2) | +0 -0.0061 in |
| Tolerance of Shaft (T1) | +0 -0.0061 in |
| Total Width at Relaxed State (Dimension L) | 126.01 mm4.961 in |
| Type | Internal |
68514421516
📏 Dimensions on request
43138X - 43319D
📏 Dimensions on request
LSE800BRHSAFQAKPS
📏 Dimensions on request
MSM460BXHSATL
📏 Dimensions on request
GRAE17RRB
📏 Dimensions on request
68514485258
📏 Dimensions on request
40X80X10-RLS35-S
📏 Dimensions on request
LFS52-OV-500/90-VBS
📏 Dimensions on request
MSE900BRHSKPS
📏 Dimensions on request
MSM480BXHSHTPS
📏 Dimensions on request
68514419544
📏 Dimensions on request