239/500YMBW509C08C3
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790410761
Custom & Special Bearings · Dimensions on request
108.03 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790410761 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 108.03 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 108.03 lb |
| Catalogue Ref. | O7BEXY6B6k |
| # of Locking Screws | 40 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 84.00 mm3.307 in |
| Coupling Size | SLD1500 |
| Cubic inches | 46040.32499 mm³1812.61122 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 420.00 mm16.535 in |
| Locking Screw Size (Dimension T) | M22 |
| Max. Transmissible Axial Force | 455399.00 lbf |
| Max. Transmissible Torque | 313759.00 ft·lb |
| Pressure on The Hub | 17405.00 psi |
| Pressure on The Shaft | 22046.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 583.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 515.00 mm20.276 in |
| Shaft Size | 420 x 515 mm |
| Style | Self Releasing |
| Thrust Rings Width at Relaxed State (Dimension B) | 90.00 mm3.543 in |
| Tolerance of Hub Bore (T2) | +0 -0.0061 in |
| Tolerance of Shaft (T1) | +0 -0.0061 in |
| Total Width at Relaxed State (Dimension L) | 111.99 mm4.409 in |
| Type | Internal |
68514426770
📏 Dimensions on request
68514485031
📏 Dimensions on request
6209-Z-C3
📏 Dimensions on request
100X130X12-RLS35-V
📏 Dimensions on request
69790497631
📏 Dimensions on request
MSE608BRHSRSS
📏 Dimensions on request
MSM440BRHS
📏 Dimensions on request
MSE908BRHFATL
📏 Dimensions on request
899 - 892
📏 Dimensions on request
1097N
📏 Dimensions on request