69790498204
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790410757
Custom & Special Bearings · Dimensions on request
4.08 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790410757 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 4.08 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 4.08 lb |
| Catalogue Ref. | J5xWTYbZcZ |
| # of Locking Screws | 15 |
| Application | Internal Shaft Locking Device |
| Contact Length (Dimension l) | 26.00 mm1.024 in |
| Coupling Size | SLD 1500 |
| Cubic inches | 1433.84330 mm³56.45052 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 98.43 mm3.875 in |
| Locking Screw Size (Dimension T) | M12 |
| Material | Silver/Metallic |
| Max. Transmissible Axial Force | 45560.00 lbf |
| Max. Transmissible Torque | 7356.00 ft·lb |
| Pressure on The Hub | 20676.00 psi |
| Pressure on The Shaft | 30456.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 91.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 145.00 mm5.709 in |
| Shaft Size | 3 7/Series 8 in |
| Style | Self Releasing |
| Thrust Rings Width at Relaxed State (Dimension B) | Series 32.00 mm1.260 in |
| Tolerance of Hub Bore (T2) | -0 +0.0035 in |
| Tolerance of Shaft (T1) | +0 -0.0035 in |
| Total Width at Relaxed State (Dimension L) | 43.99 mm1.732 in |
| Type | Internal |
MSM600BRHS
📏 Dimensions on request
68514412292
📏 Dimensions on request
MSE403BRHSRSS
📏 Dimensions on request
MSM75BRHTPRSS
📏 Dimensions on request
MSM125BXHSHTPS
📏 Dimensions on request
MSM330BXHSRSS
📏 Dimensions on request
LSE615BRHSAFQ
📏 Dimensions on request
LSE404BXHFHTPS
📏 Dimensions on request
42376 - 42587
📏 Dimensions on request
LSE211BRHSAFQHTPS
📏 Dimensions on request
030BULK
📏 Dimensions on request