68514416259
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790410605
Custom & Special Bearings · Dimensions on request
105.82 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790410605 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 105.82 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 105.82 lb |
| Catalogue Ref. | DpLOjo8I8W |
| # of Locking Screws | 36 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 84.00 mm3.307 in |
| Coupling Size | SLD1500 |
| Cubic inches | 42531.27061 mm³1674.45947 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 400.00 mm15.748 in |
| Locking Screw Size (Dimension T) | M22 |
| Max. Transmissible Axial Force | 410276.00 lbf |
| Max. Transmissible Torque | 269210.00 ft·lb |
| Pressure on The Hub | 17405.00 psi |
| Pressure on The Shaft | 20885.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 583.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 495.00 mm19.488 in |
| Shaft Size | 400 x 495 mm |
| Style | Self Releasing |
| Thrust Rings Width at Relaxed State (Dimension B) | 90.00 mm3.543 in |
| Tolerance of Hub Bore (T2) | +0 -0.0055 in |
| Tolerance of Shaft (T1) | +0 -0.0055 in |
| Total Width at Relaxed State (Dimension L) | 111.99 mm4.409 in |
| Type | Internal |
LSE300BXHSAFQAKPS
📏 Dimensions on request
68514418645
📏 Dimensions on request
STUNG-COMPAX0200-M
📏 Dimensions on request
69790498297
📏 Dimensions on request
LSM220BXHFATL
📏 Dimensions on request
MSM70BRHFKPS
📏 Dimensions on request
009V35
📏 Dimensions on request
LSM240BRHSDQRSS
📏 Dimensions on request
68514441381
📏 Dimensions on request
6302-2RZ
📏 Dimensions on request
68514425203
📏 Dimensions on request
69790497966
📏 Dimensions on request