HSE411BXHS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790410601
Custom & Special Bearings · Dimensions on request
13.89 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790410601 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 13.89 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 13.89 lb |
| Catalogue Ref. | IQgyIebjc9 |
| # of Locking Screws | Series 9 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 39.00 mm1.535 in |
| Coupling Size | SLD900 |
| Cubic inches | 4084.23285 mm³160.79657 in3 |
| Disc Outside Diameter (Dimension D) | 188.01 mm7.402 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.217 in |
| Hub Outside Diameter (Dimension d) | 115.00 mm4.528 in |
| Locking Screw Size (Dimension T) | M10 |
| Locking Screws Size | M10 |
| Max. Diametrical Clearance (Dimension C) | 0.002 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 6269.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 6269 to 8851 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 44.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 3.150 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 188.01 mm7.402 in |
| Shaft Size | 115.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 50.00 mm1.969 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0021 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 57.00 mm2.244 in |
| Type | External |
LSM150BXHSDQ
📏 Dimensions on request
L713049A - L713010
📏 Dimensions on request
68514424333
📏 Dimensions on request
MSE715BXHS
📏 Dimensions on request
MSE403BXHSHTPS
📏 Dimensions on request
68514438202
📏 Dimensions on request
68514455229
📏 Dimensions on request
MSE300BXHSHTPS
📏 Dimensions on request
GN215KRRB
📏 Dimensions on request
MSE715BRHSAFQAHTPS
📏 Dimensions on request