VAK 1 3/4
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790408176
Ball Bearing Units · Dimensions on request
Series 223.50 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790408176 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 223.50 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 223.50 lb |
| Catalogue Ref. | iSngqu1S6c |
| AISE Motor Frame Size | 614 |
| Bore Size (Dimension TB) | 4.2470 to 4.2485 in |
| Color | Metallic |
| Coupling Type | Gear |
| Cubic inches | 761.82750 in3 |
| Dimension FD | 425.45 mm16.75 in |
| Dimension HD | 266.70 mm10.50 in |
| Features | Patented Vari-Crown® tooth form for long life Standard 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards Long Universal Hub used for AISE Motor Frames |
| Hub Material | AISI 1045 |
| Hub Style | Exposed Bolt |
| Keyway Size (W x D) | 1 x 3/8 in |
| Max. Bore (Dimensions ID1/ID2) | 200 mm7.500 in |
| Max. Speed (Balanced) | 3300 rpm |
| Max. Speed (Unbalanced) | 2200 rpm |
| Nominal Torque | 573300 in·lb |
| Notes | Counterbore is required for hub size 1.5. Bore taper is 1-1/4 inch per foot on diameter. Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1.5 through 5.5. Puller Holes are standard on sizes 4 through 6. Puller Holes are available for sizes 1.5 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section.1/4 inch hub standoff. |
| Set Screw Style Coupling Size (Dimension T) | No Setscrew |
| Size | 5 1/2 |
| Style | Mill Motor Hub Bored |
| Type | Gear Coupling Hubs |
LSM170ABRHFKPS
📏 Dimensions on request
SUCAFL210/F
📏 Dimensions on request
SUCATBY209-26/FVSL613
📏 Dimensions on request
QVVPL22V100S
📏 Dimensions on request
SR 140x12.5
📏 Dimensions on request
E-P4B-TRB-60MM-ECO
📏 Dimensions on request
QAATU15A211S
📏 Dimensions on request
LSM120BRHFATL
📏 Dimensions on request
UELFL209-26
📏 Dimensions on request
QMMC18J304S
📏 Dimensions on request
DVC26K407S
📏 Dimensions on request
SUCPLF206/F
📏 Dimensions on request
SUCBFB205-15/FVSL613
📏 Dimensions on request