Name: TIMKEN 69790407975
Brand: TIMKEN
SKU: 75enlO3Z35

TIMKEN 69790407975

Ball Bearing Units · Dimensions on request

15.21 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 69790407975 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 15.21 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Ball Bearing Units

Type

Ball Bearing Units

Dimensions (d × D × B)

Dimensions on request

Weight

15.21 lb

Catalogue Ref.

75enlO3Z35

AISE Motor Frame Size

603/604 & 803/804

Bore Size (Dimension TB)

1.9980 to 1.9990 in

Color

Metallic

Coupling Type

Gear

Cubic inches

Series 64.95381 in3

Dimension D

148.34 mm5.840 in

Dimension FD

212.85 mm8.38 in

Dimension G1

30.23 mm1.190 in

Dimension HD

117.60 mm4.630 in

Dimension ID1

82.55 mm3.250 in

Dimension LTB1

88.90 mm3.500 in

Dimension TB

50.75 to 50.77 mm1.998 to 1.999 in

Distance between Shaft Ends (Dimension BSE)

4.83 mm0.190 in

Features

Patented Vari-Crown® tooth form for long life Standard 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards Long Universal Hub used for AISE Motor Frames

Hub Material

AISI 1045

Hub Style

Exposed Bolt

Keyway Size (W x D)

1/2 x 1/4 in

Max. Bore (Dimensions ID1/ID2)

85 mm3.250 in

Max. Speed (Balanced)

6600.00 rpm

Max. Speed (Unbalanced)

4400 rpm

Nominal Torque

56700 in·lb

Notes

Counterbore is required for hub size 1.5. Bore taper is 1-1/4 inch per foot on diameter. Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1.5 through 5.5. Puller Holes are standard on sizes 4 through 6. Puller Holes are available for sizes 1.5 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section.1/4 inch hub standoff.

Set Screw Style Coupling Size (Dimension T)

No Setscrew

Size

2 1/2

Style

Mill Motor Hub Bored

Type

Gear Coupling Hubs