1103KLL
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790407974
Ball Bearing Units · Dimensions on request
270.20 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790407974 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 270.20 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 270.20 lb |
| Catalogue Ref. | ToK4rM3Z35 |
| AISE Motor Frame Size | 618/818 |
| Bore Size (Dimension TB) | 4.9970 to 4.9985 in |
| Color | Metallic |
| Coupling Type | Gear |
| Cubic inches | 979.97250 in3 |
| Dimension D | 355.60 mm14.000 in |
| Dimension FD | 457.20 mm18.00 in |
| Dimension G1 | 41.40 mm1.630 in |
| Dimension HD | 292.10 mm11.50 in |
| Dimension ID1 | 209.55 mm8.250 in |
| Dimension LTB1 | 152.40 mm6.000 in |
| Dimension TB | 126.92 to 126.96 mm4.9970 to 4.9985 in |
| Distance between Shaft Ends (Dimension BSE) | 7.87 mm0.310 in |
| Features | Patented Vari-Crown® tooth form for long life Standard 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards Long Universal Hub used for AISE Motor Frames |
| Hub Material | AISI 1045 |
| Hub Style | Exposed Bolt |
| Keyway Size (W x D) | 1 1/4 x 1/2 in |
| Max. Bore (Dimensions ID1/ID2) | 225 mm8.250 in |
| Max. Speed (Balanced) | 3150 rpm |
| Max. Speed (Unbalanced) | 2100 rpm |
| Nominal Torque | 749700 in·lb |
| Notes | Counterbore is required for hub size 1.5. Bore taper is 1-1/4 inch per foot on diameter. Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1.5 through 5.5. Puller Holes are standard on sizes 4 through 6. Puller Holes are available for sizes 1.5 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section.1/4 inch hub standoff. |
| Set Screw Style Coupling Size (Dimension T) | No Setscrew |
| Size | 6 |
| Style | Mill Motor Hub Bored |
| Type | Gear Coupling Hubs |
QVVMC15V065S
📏 Dimensions on request
SUCSTB209-27/FVSL613
📏 Dimensions on request
SUCBFB210-32/FVSL613
📏 Dimensions on request
E-TU-TRB-60MM-ECO/ECO
📏 Dimensions on request
SNT 516-613 - 21313K - VR613
📏 Dimensions on request
TU-8x36
📏 Dimensions on request
LSE1000BXHF
📏 Dimensions on request
SDAF 23068K 12-1/2
📏 Dimensions on request
E-TTU-TRB-2 15/16-ECO
📏 Dimensions on request
69790400139
📏 Dimensions on request
C-UKF215D1;H2315X
📏 Dimensions on request
SD 636
📏 Dimensions on request
E45KRRB
📏 Dimensions on request