HSE600BXHFRSS
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790407971
Ball Bearing Units · Dimensions on request
218.30 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790407971 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 218.30 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 218.30 lb |
| Catalogue Ref. | MRCjqS564u |
| AISE Motor Frame Size | 618/818 |
| Bore Size (Dimension TB) | 4.9970 to 4.9985 in |
| Color | Metallic |
| Coupling Type | Gear |
| Cubic inches | 761.82750 in3 |
| Dimension D | 323.09 mm12.72 in |
| Dimension FD | 425.45 mm16.75 in |
| Dimension G1 | 41.40 mm1.630 in |
| Dimension HD | 266.70 mm10.50 in |
| Dimension ID1 | 190.50 mm7.500 in |
| Dimension LTB1 | 152.40 mm6.000 in |
| Dimension TB | 126.92 to 126.96 mm4.9970 to 4.9985 in |
| Distance between Shaft Ends (Dimension BSE) | 7.87 mm0.310 in |
| Features | Patented Vari-Crown® tooth form for long life Standard 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards Long Universal Hub used for AISE Motor Frames |
| Hub Material | AISI 1045 |
| Hub Style | Exposed Bolt |
| Keyway Size (W x D) | 1 1/4 x 1/2 in |
| Max. Bore (Dimensions ID1/ID2) | 200 mm7.500 in |
| Max. Speed (Balanced) | 3300 rpm |
| Max. Speed (Unbalanced) | 2200 rpm |
| Nominal Torque | 573300 in·lb |
| Notes | Counterbore is required for hub size 1.5. Bore taper is 1-1/4 inch per foot on diameter. Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1.5 through 5.5. Puller Holes are standard on sizes 4 through 6. Puller Holes are available for sizes 1.5 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section.1/4 inch hub standoff. |
| Set Screw Style Coupling Size (Dimension T) | No Setscrew |
| Size | 5 1/2 |
| Style | Mill Motor Hub Bored |
| Type | Gear Coupling Hubs |
TAS 1 3/8
📏 Dimensions on request
LAK 1 3/4
📏 Dimensions on request
QVFL16V215S
📏 Dimensions on request
SNT 510-608 - 21308K - LO608/ 1-1/4
📏 Dimensions on request
C-UKF212D1;H2312X
📏 Dimensions on request
QMSN22J407S
📏 Dimensions on request
QVPH28V130S
📏 Dimensions on request
QAAF11A204S
📏 Dimensions on request
FSNT 522-619 - 22319 - TA319
📏 Dimensions on request
GYM1300KRRB
📏 Dimensions on request
E-P4B-TRB-4 7/16-ECO/ECC
📏 Dimensions on request
C-UKFC205D1;H2305X
📏 Dimensions on request
SDAF 23196K 18
📏 Dimensions on request