Name: TIMKEN 69790407969
Brand: TIMKEN
SKU: ir4go88l8u

TIMKEN 69790407969

Ball Bearing Units · Dimensions on request

90.30 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 69790407969 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 90.30 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Ball Bearing Units

Type

Ball Bearing Units

Dimensions (d × D × B)

Dimensions on request

Weight

90.30 lb

Catalogue Ref.

ir4go88l8u

AISE Motor Frame Size

620

Bore Size (Dimension TB)

5.8720 to 5.8735 in

Color

Metallic

Coupling Type

Gear

Cubic inches

544.20750 in3

Dimension D

293.62 mm11.560 in

Dimension FD

388.87 mm15.31 in

Dimension G1

52.32 mm2.060 in

Dimension HD

241.30 mm9.500 in

Dimension ID1

165.10 mm6.500 in

Dimension LTB1

171.45 mm6.750 in

Dimension TB

149.15 to 149.19 mm5.8720 to 5.8735 in

Distance between Shaft Ends (Dimension BSE)

7.87 mm0.310 in

Features

Patented Vari-Crown® tooth form for long life Standard 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards Long Universal Hub used for AISE Motor Frames

Hub Material

AISI 1045

Hub Style

Exposed Bolt

Keyway Size (W x D)

1 1/2 x 3/4 in

Max. Bore (Dimensions ID1/ID2)

180 mm6.500 in

Max. Speed (Balanced)

3750.00 rpm

Max. Speed (Unbalanced)

2500 rpm

Nominal Torque

434700 in·lb

Notes

Counterbore is required for hub size 1.5. Bore taper is 1-1/4 inch per foot on diameter. Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1.5 through 5.5. Puller Holes are standard on sizes 4 through 6. Puller Holes are available for sizes 1.5 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section.1/4 inch hub standoff.

Set Screw Style Coupling Size (Dimension T)

No Setscrew

Size

Style

Mill Motor Hub Bored

Type

Gear Coupling Hubs