LSE1100BRHFKPS
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790407965
Ball Bearing Units · Dimensions on request
48.00 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790407965 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 48.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 48.00 lb |
| Catalogue Ref. | HAMiXIasb6 |
| AISE Motor Frame Size | 618/818 |
| Bore Size (Dimension TB) | 4.9970 to 4.9985 in |
| Color | Metallic |
| Coupling Type | Gear |
| Cubic inches | 267.18750 in3 |
| Dimension D | 234.95 mm9.250 in |
| Dimension FD | 317.50 mm12.50 in |
| Dimension G1 | 39.62 mm1.560 in |
| Dimension HD | 190.50 mm7.500 in |
| Dimension ID1 | 136.53 mm5.375 in |
| Dimension LTB1 | 152.40 mm6.000 in |
| Dimension TB | 126.92 to 126.96 mm4.9970 to 4.9985 in |
| Distance between Shaft Ends (Dimension BSE) | 6.35 mm0.250 in |
| Features | Patented Vari-Crown® tooth form for long life Standard 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards Long Universal Hub used for AISE Motor Frames |
| Hub Material | AISI 1045 |
| Hub Style | Exposed Bolt |
| Keyway Size (W x D) | 1 1/4 x 1/2 in |
| Max. Bore (Dimensions ID1/ID2) | 145 mm5.375 in |
| Max. Speed (Balanced) | 4500.00 rpm |
| Max. Speed (Unbalanced) | 3000 rpm |
| Nominal Torque | 220500 in·lb |
| Notes | Counterbore is required for hub size 1.5. Bore taper is 1-1/4 inch per foot on diameter. Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1.5 through 5.5. Puller Holes are standard on sizes 4 through 6. Puller Holes are available for sizes 1.5 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section.1/4 inch hub standoff. |
| Set Screw Style Coupling Size (Dimension T) | No Setscrew |
| Size | 4 |
| Style | Mill Motor Hub Bored |
| Type | Gear Coupling Hubs |
QAAFL20A100S
📏 Dimensions on request
SUCAF209/FVSL613
📏 Dimensions on request
QAAFX22A115S
📏 Dimensions on request
UK207 - H2307
📏 Dimensions on request
LSM150BXHFRSS
📏 Dimensions on request
QVVPF19V307S
📏 Dimensions on request
UKP218 - H2318
📏 Dimensions on request
SNT 507-606 - 21306 - LO306
📏 Dimensions on request
QAAPL11A203S
📏 Dimensions on request
VJ-PDNB 210
📏 Dimensions on request
QAAPL11A204S
📏 Dimensions on request
ECP-U206-20
📏 Dimensions on request
QVF22V315S
📏 Dimensions on request