NAU4LKBF208-24
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790401104
Ball Bearing Units · Dimensions on request
0.13 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790401104 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 0.13 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.13 lb |
| Catalogue Ref. | nHkiD57j7c |
| Color | Black |
| Complete Coupling Weight | 950.00 lb |
| Coupling Type | Gear |
| Cubic inches | 168.00000 in3 |
| Depth | 1.00 in |
| Dimension AD | 249.43 mm9.820 in |
| Distance between Shaft Ends (Dimension BSE) | 9.65 mm0.380 in |
| Features | Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards |
| Height | 12.0 in |
| Hub Material | Buna-N Rubber |
| Max. Angular Misalignment | 1.50o per Gear Mesh |
| Max. Bore (Dimensions ID1/ID2) | 255 mmSeries 10.039 in |
| Max. Speed (Balanced) | 3000.00 rpm |
| Max. Speed (Unbalanced) | 2000 rpm |
| Nominal Torque | 1008000 in·lb |
| Normal Temperature Range | -40 to 212 oF |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through Series 9. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bores and keyway tolerances, consult Lovejoy Engineering Section. |
| Parallel Misalignment | 0.135 in |
| Size | 7 |
| Style | O-Ring |
| Type | O-Rings |
| Width | 14.000 in |
SN 219C
📏 Dimensions on request
E-TTU-TRB-85MM-ECO/ECC
📏 Dimensions on request
69790413644
📏 Dimensions on request
LSM65BXHF
📏 Dimensions on request
CM-UKF213D1;H2313X
📏 Dimensions on request
SUCAP210-31/FVSL613
📏 Dimensions on request
SUCAT210-30/F
📏 Dimensions on request
UCP306
📏 Dimensions on request
SN 3132 1
📏 Dimensions on request
UK209 - HE2309
📏 Dimensions on request
TAMC15K207S
📏 Dimensions on request
HSE415BXHFRSS
📏 Dimensions on request
LSM135BRHFRSS
📏 Dimensions on request