AW32X
📏 Dimensions on request
Product Photo
TIMKENBearing Accessories
TIMKEN 69790400442
Bearing Accessories · Dimensions on request
31.53 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790400442 is a Bearing Accessories, available in the dimensions listed in the specification table below, and a unit weight of 31.53 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Bearing Accessories |
| Type | Bearing Accessories |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 31.53 lb |
| Catalogue Ref. | yFhjqld3ej |
| Application | Driver and Driven |
| Color | Metallic |
| Complete Coupling Weight | 190.00 lb |
| Cubic inches | 742.18750 in3 |
| Dimension AD | 127.00 mm5.000 in |
| Dimension D | 234.95 mm9.250 in |
| Dimension FD | 317.50 mm12.50 in |
| Distance between Shaft Ends (Dimension BSE) | 6.35 mm0.25 in |
| Features | Patented Vari-Crown® tooth form for long life Standard 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards |
| Hub Style | Shrouded Bolt |
| Length thru Bore | 120.65 mm4.750 in |
| Material | 1045 Steel |
| Max. Angular Misalignment (per Gear Mesh) | 1.50 o |
| Max. Bore (Dimensions ID1/ID2) | 145 mm5.709 in |
| Max. Speed (Balanced) | 4500.00 rpm |
| Max. Speed (Unbalanced) | 3000 rpm |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through 9. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bores and keyway tolerances, consult Lovejoy Engineering Section. |
| Parallel Misalignment | 0.150 in |
| Size | 4 in |
| Style | Shrouded Bolt Sleeve |
| Torque | 220500 in·lb |
| Type | Sleeves |
455583N
📏 Dimensions on request
710959
📏 Dimensions on request
1104KRR
📏 Dimensions on request
434BULK
📏 Dimensions on request
416268
📏 Dimensions on request
68514412275
📏 Dimensions on request
370120A
📏 Dimensions on request
SNW-44 x 7 7/8
📏 Dimensions on request
451948
📏 Dimensions on request
H3028
📏 Dimensions on request
AH3048
📏 Dimensions on request
SNT 510-608 - 22210K - VR510
📏 Dimensions on request