AH24140
📏 Dimensions on request
Product Photo
TIMKENBearing Accessories
TIMKEN 69790400369
Bearing Accessories · Dimensions on request
81.00 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790400369 is a Bearing Accessories, available in the dimensions listed in the specification table below, and a unit weight of 81.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Bearing Accessories |
| Type | Bearing Accessories |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 81.00 lb |
| Catalogue Ref. | ctncxd8q8A |
| Application | Driver and Driven |
| Color | Metallic |
| Complete Coupling Weight | 520.00 lb |
| Cubic inches | 1938.68688 in3 |
| Dimension AD | 178.82 mm7.040 in |
| Dimension D | 323.09 mm12.72 in |
| Dimension FD | 425.45 mm16.75 in |
| Distance between Shaft Ends (Dimension BSE) | 7.87 mm0.31 in |
| Features | Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards |
| Hub Style | Shrouded Bolt |
| Length thru Bore | 175.51 mm6.910 in |
| Material | 1045 Steel |
| Max. Angular Misalignment (per Gear Mesh) | 1.50 o |
| Max. Bore (Dimensions ID1/ID2) | 200 mm7.874 in |
| Max. Speed (Balanced) | 3300 rpm |
| Max. Speed (Unbalanced) | 2200 rpm |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through Series 9. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bores and keyway tolerances, consult Lovejoy Engineering Section. |
| Parallel Misalignment | 0.220 in |
| Size | Series 5 1/2 in |
| Style | Shrouded Bolt Sleeve |
| Torque | 573300 in·lb |
| Type | Sleeves |
320583
📏 Dimensions on request
470737
📏 Dimensions on request
SNL 530
📏 Dimensions on request
481267
📏 Dimensions on request
8650S
📏 Dimensions on request
474273
📏 Dimensions on request
GN106KRRB
📏 Dimensions on request
1111KLLB
📏 Dimensions on request
710436
📏 Dimensions on request
8660L
📏 Dimensions on request
17X30X7-R2LS32-S
📏 Dimensions on request
710218
📏 Dimensions on request