SUCAFL208-25/FVSL613
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790400229
Ball Bearing Units · Dimensions on request
1.20 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790400229 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 1.20 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.20 lb |
| Catalogue Ref. | evIesb7j7c |
| Color | Black |
| Complete Coupling Weight | 380.00 lb |
| Coupling Type | Gear |
| Cubic inches | 168.00000 in3 |
| Depth | 1.00 in |
| Dimension AD | 161.04 mm6.340 in |
| Distance between Shaft Ends (Dimension BSE) | 7.87 mm0.310 in |
| Features | Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards |
| Height | 12.0 in |
| Hub Material | Buna-N Rubber |
| Max. Angular Misalignment | 1.50o per Gear Mesh |
| Max. Bore (Dimensions ID1/ID2) | 180 mm7.087 in |
| Max. Speed (Balanced) | 3750.00 rpm |
| Max. Speed (Unbalanced) | 2500 rpm |
| Nominal Torque | 434700 in·lb |
| Normal Temperature Range | -40 to 212 oF |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through Series 9. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bores and keyway tolerances, consult Lovejoy Engineering Section. |
| Parallel Misalignment | 0.200 in |
| Size | Series 5 |
| Style | O-Ring |
| Type | O-Rings |
| Width | 14.000 in |
MSM160BRHF
📏 Dimensions on request
MSE303BXHFRSS
📏 Dimensions on request
E-PF-TRB-1 3/8-ECO
📏 Dimensions on request
QMC18J080S
📏 Dimensions on request
SUCBFB205-16/FVSL613
📏 Dimensions on request
SNT 512-610 - 22212K - VR512
📏 Dimensions on request
NAU4LKATBY204-12
📏 Dimensions on request
QVVCW12V203S
📏 Dimensions on request
QAAP20A400S
📏 Dimensions on request
QVPA26V408S
📏 Dimensions on request
RAS 1 11/16
📏 Dimensions on request
E-P2B-TRB-1 3/16-ECO/ECO
📏 Dimensions on request
QAAFY20A315S
📏 Dimensions on request