710750
📏 Dimensions on request
Product Photo
TIMKENBearing Accessories
TIMKEN 69790400198
Bearing Accessories · Dimensions on request
14.78 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790400198 is a Bearing Accessories, available in the dimensions listed in the specification table below, and a unit weight of 14.78 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Bearing Accessories |
| Type | Bearing Accessories |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 14.78 lb |
| Catalogue Ref. | IsmWRD3o2m |
| Application | Driver and Driven |
| Color | Metallic |
| Complete Coupling Weight | 80.00 lb |
| Cubic inches | 319.91782 in3 |
| Dimension AD | 100.84 mm3.970 in |
| Dimension D | 173.74 mm6.840 in |
| Dimension FD | 239.78 mm9.44 in |
| Distance between Shaft Ends (Dimension BSE) | 4.83 mm0.19 in |
| Features | Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards |
| Hub Style | Exposed Bolt |
| Length thru Bore | 91.19 mm3.590 in |
| Material | 1045 Steel |
| Max. Angular Misalignment (per Gear Mesh) | 1.50 o |
| Max. Bore (Dimensions ID1/ID2) | 107 mm4.213 in |
| Max. Speed (Balanced) | 6000.00 rpm |
| Max. Speed (Unbalanced) | 4000 rpm |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through Series 9. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bores and keyway tolerances, consult Lovejoy Engineering Section. |
| Parallel Misalignment | 0.115 in |
| Size | 3 in |
| Style | Exposed Bolt Sleeve |
| Torque | 94500 in·lb |
| Type | Sleeves |
SNW-16 x 2 5/8
📏 Dimensions on request
5924
📏 Dimensions on request
350909
📏 Dimensions on request
69790405353
📏 Dimensions on request
RA008RRB
📏 Dimensions on request
1113KRR
📏 Dimensions on request
UC216-50
📏 Dimensions on request
22220 EK
📏 Dimensions on request
SNP-3084 x 15 3/4
📏 Dimensions on request
KM 31
📏 Dimensions on request