UCFL311-32
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790400188
Ball Bearing Units · Dimensions on request
0.40 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790400188 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 0.40 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.40 lb |
| Catalogue Ref. | sgRXOVaWbH |
| Color | Black |
| Complete Coupling Weight | 54.00 lb |
| Coupling Type | Gear |
| Cubic inches | 48.00000 in3 |
| Depth | 1.00 in |
| Dimension AD | 88.14 mm3.470 in |
| Distance between Shaft Ends (Dimension BSE) | 4.83 mm0.190 in |
| Features | Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards |
| Height | 6.000 in |
| Hub Material | Buna-N Rubber |
| Max. Angular Misalignment | 1.50o per Gear Mesh |
| Max. Bore (Dimensions ID1/ID2) | 85 mm3.346 in |
| Max. Speed (Balanced) | 6600.00 rpm |
| Max. Speed (Unbalanced) | 4400 rpm |
| Nominal Torque | 56700 in·lb |
| Normal Temperature Range | -40 to 212 oF |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through Series 9. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bores and keyway tolerances, consult Lovejoy Engineering Section. |
| Parallel Misalignment | 0.105 in |
| Size | 2 1/2 |
| Style | O-Ring |
| Type | O-Rings |
| Width | Series 8.000 in |
SUCAT207-23/F
📏 Dimensions on request
E-4BF-TRB-1 5/8-ECO
📏 Dimensions on request
NAU4LKAF209-28
📏 Dimensions on request
QAAC11A204S
📏 Dimensions on request
LSE515BXHFKPS
📏 Dimensions on request
QAAPF18A080S
📏 Dimensions on request
LSE211BXHG
📏 Dimensions on request
LSE400BXHGHTPS
📏 Dimensions on request
LSE103BXHG
📏 Dimensions on request
QMSN22J115S
📏 Dimensions on request
LSM115BXHFATL
📏 Dimensions on request
UC311-35
📏 Dimensions on request
SN512
📏 Dimensions on request