HM3152
📏 Dimensions on request
Product Photo
TIMKENBearing Accessories
TIMKEN 69790400186
Bearing Accessories · Dimensions on request
12.58 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790400186 is a Bearing Accessories, available in the dimensions listed in the specification table below, and a unit weight of 12.58 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Bearing Accessories |
| Type | Bearing Accessories |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 12.58 lb |
| Catalogue Ref. | BmXZQn4w3K |
| Application | Driver and Driven |
| Color | Metallic |
| Complete Coupling Weight | 54.00 lb |
| Cubic inches | 212.77993 in3 |
| Dimension AD | 88.14 mm3.470 in |
| Dimension D | 148.34 mm5.840 in |
| Dimension FD | 212.85 mmSeries 8.38 in |
| Distance between Shaft Ends (Dimension BSE) | 4.83 mm0.19 in |
| Features | Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards |
| Hub Style | Exposed Bolt |
| Length thru Bore | 76.96 mm3.030 in |
| Material | 1045 Steel |
| Max. Angular Misalignment (per Gear Mesh) | 1.50 o |
| Max. Bore (Dimensions ID1/ID2) | 85 mm3.346 in |
| Max. Speed (Balanced) | 6600.00 rpm |
| Max. Speed (Unbalanced) | 4400 rpm |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through Series 9. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bores and keyway tolerances, consult Lovejoy Engineering Section. |
| Parallel Misalignment | 0.105 in |
| Size | 2 1/2 in |
| Style | Exposed Bolt Sleeve |
| Torque | 56700 in·lb |
| Type | Sleeves |
23222 CCK/W33
📏 Dimensions on request
221410
📏 Dimensions on request
417940
📏 Dimensions on request
AOH3144
📏 Dimensions on request
SNL 3168 GF
📏 Dimensions on request
26X37X7-RLS35-S
📏 Dimensions on request
442507
📏 Dimensions on request
SNL 30Series 64
📏 Dimensions on request
1103KPPB3
📏 Dimensions on request
SNW-40 x 7 3/16
📏 Dimensions on request
710550
📏 Dimensions on request
HMZ38
📏 Dimensions on request
FSNL Series 512-610
📏 Dimensions on request