473213
📏 Dimensions on request
Product Photo
TIMKENBearing Accessories
TIMKEN 69790400174
Bearing Accessories · Dimensions on request
6.61 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790400174 is a Bearing Accessories, available in the dimensions listed in the specification table below, and a unit weight of 6.61 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Bearing Accessories |
| Type | Bearing Accessories |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 6.61 lb |
| Catalogue Ref. | ku96vP6D6m |
| Application | Driver and Driven |
| Color | Metallic |
| Complete Coupling Weight | 34.00 lb |
| Cubic inches | 119.56000 in3 |
| Dimension AD | 74.68 mm2.940 in |
| Dimension D | 123.44 mm4.860 in |
| Dimension FD | 177.80 mm7.00 in |
| Distance between Shaft Ends (Dimension BSE) | 3.30 mm0.13 in |
| Features | Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards |
| Hub Style | Exposed Bolt |
| Length thru Bore | 61.98 mm2.440 in |
| Material | 1045 Steel |
| Max. Angular Misalignment (per Gear Mesh) | 1.50 o |
| Max. Bore (Dimensions ID1/ID2) | 73 mm2.874 in |
| Max. Speed (Balanced) | 7500.00 rpm |
| Max. Speed (Unbalanced) | 5000 rpm |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through Series 9. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bores and keyway tolerances, consult Lovejoy Engineering Section. |
| Parallel Misalignment | 0.085 in |
| Size | 2 in |
| Style | Exposed Bolt Sleeve |
| Torque | 31500 in·lb |
| Type | Sleeves |
22312EAKE4+A2312XNSKDimensions on request
39302
📏 Dimensions on request
SNT 526 - 23226K - VR526
📏 Dimensions on request
AOH2260G
📏 Dimensions on request
710447
📏 Dimensions on request
16X28X7-RLS35-S
📏 Dimensions on request
Series 22309 EK
📏 Dimensions on request
451078
📏 Dimensions on request
69790400120
📏 Dimensions on request
G1106KLL
📏 Dimensions on request
J1133
📏 Dimensions on request
68514477204
📏 Dimensions on request