AH3136G
📏 Dimensions on request
Product Photo
TIMKENBearing Accessories
TIMKEN 69790400158
Bearing Accessories · Dimensions on request
4.97 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790400158 is a Bearing Accessories, available in the dimensions listed in the specification table below, and a unit weight of 4.97 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Bearing Accessories |
| Type | Bearing Accessories |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 4.97 lb |
| Catalogue Ref. | gCMbLB473f |
| Application | Driver and Driven |
| Color | Metallic |
| Complete Coupling Weight | 19.00 lb |
| Cubic inches | 69.84000 in3 |
| Dimension AD | 58.93 mm2.320 in |
| Dimension D | 100.84 mm3.970 in |
| Dimension FD | 152.40 mm6.00 in |
| Distance between Shaft Ends (Dimension BSE) | 3.30 mm0.13 in |
| Features | Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards |
| Hub Style | Exposed Bolt |
| Length thru Bore | 49.28 mm1.940 in |
| Material | 1045 Steel |
| Max. Angular Misalignment (per Gear Mesh) | 1.50 o |
| Max. Bore (Dimensions ID1/ID2) | 56 mm2.205 in |
| Max. Speed (Balanced) | 8250.00 rpm |
| Max. Speed (Unbalanced) | 5500 rpm |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through Series 9. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bores and keyway tolerances, consult Lovejoy Engineering Section. |
| Parallel Misalignment | 0.060 in |
| Size | 1 in |
| Style | Exposed Bolt Sleeve |
| Torque | 18900 in·lb |
| Type | Sleeves |
1114KLL
📏 Dimensions on request
65X85X13-R2LS32-S
📏 Dimensions on request
455147
📏 Dimensions on request
HM30/600
📏 Dimensions on request
330699
📏 Dimensions on request
22224 EK
📏 Dimensions on request
AH24096
📏 Dimensions on request
SNW-117 x 2 13/16
📏 Dimensions on request
AWL26X
📏 Dimensions on request
710891
📏 Dimensions on request
225450
📏 Dimensions on request
15X25X5-RLS35-V
📏 Dimensions on request
GYAE25RRB
📏 Dimensions on request