69790400140
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790400143
Ball Bearing Units · Dimensions on request
0.25 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790400143 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 0.25 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.25 lb |
| Catalogue Ref. | rFfCaVd3ej |
| Color | Black |
| Complete Coupling Weight | 9.00 lb |
| Coupling Type | Gear |
| Cubic inches | 48.00000 in3 |
| Depth | 1.00 in |
| Dimension AD | 51.82 mm2.040 in |
| Distance between Shaft Ends (Dimension BSE) | 3.30 mm0.130 in |
| Features | Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards |
| Height | 6.000 in |
| Hub Material | Buna-N Rubber |
| Max. Angular Misalignment | 1.50o per Gear Mesh |
| Max. Bore (Dimensions ID1/ID2) | 42 mm1.654 in |
| Max. Speed (Balanced) | 9000.00 rpm |
| Max. Speed (Unbalanced) | 6000 rpm |
| Nominal Torque | 7600 in·lb |
| Normal Temperature Range | -40 to 212 oF |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through Series 9. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bores and keyway tolerances, consult Lovejoy Engineering Section. |
| Parallel Misalignment | 0.056 in |
| Size | 1 |
| Style | O-Ring |
| Type | O-Rings |
| Width | Series 8.000 in |
QVVC26V408S
📏 Dimensions on request
UCFC216-50
📏 Dimensions on request
SUCBF206-20/FVSL613
📏 Dimensions on request
SDAF 22236
📏 Dimensions on request
QVVFB22V312S
📏 Dimensions on request
SNT 216 - 22216 - LO216
📏 Dimensions on request
MSE112BRHFHTPS
📏 Dimensions on request
CM-UKF216D1;H2316X
📏 Dimensions on request
QVFX19V303S
📏 Dimensions on request
ECP-U210
📏 Dimensions on request
HCPE205-16
📏 Dimensions on request
HCPE207-20
📏 Dimensions on request
HCPE206-18
📏 Dimensions on request