H3288
📏 Dimensions on request
Product Photo
TIMKENBearing Accessories
TIMKEN 69790400141
Bearing Accessories · Dimensions on request
2.34 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790400141 is a Bearing Accessories, available in the dimensions listed in the specification table below, and a unit weight of 2.34 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Bearing Accessories |
| Type | Bearing Accessories |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 2.34 lb |
| Catalogue Ref. | oU07fB473f |
| Application | Driver and Driven |
| Color | Metallic |
| Complete Coupling Weight | 9.00 lb |
| Cubic inches | 35.14118 in3 |
| Dimension AD | 51.82 mm2.040 in |
| Dimension D | 77.72 mm3.060 in |
| Dimension FD | 115.82 mm4.56 in |
| Distance between Shaft Ends (Dimension BSE) | 3.30 mm0.13 in |
| Features | Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards |
| Hub Style | Exposed Bolt |
| Length thru Bore | 42.93 mm1.690 in |
| Material | 1045 Steel |
| Max. Angular Misalignment (per Gear Mesh) | 1.50 o |
| Max. Bore (Dimensions ID1/ID2) | 42 mm1.654 in |
| Max. Speed (Balanced) | 9000.00 rpm |
| Max. Speed (Unbalanced) | 6000 rpm |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through Series 9. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bores and keyway tolerances, consult Lovejoy Engineering Section. |
| Parallel Misalignment | 0.056 in |
| Size | 1 in |
| Style | Exposed Bolt Sleeve |
| Torque | 7600 in·lb |
| Type | Sleeves |
HYDNUT225-HEAVY
📏 Dimensions on request
710437
📏 Dimensions on request
AOH3044G
📏 Dimensions on request
99145
📏 Dimensions on request
473421
📏 Dimensions on request
HMV - Series 10
📏 Dimensions on request
GRAE20RRB
📏 Dimensions on request
SNW-13 x 2 1/8
📏 Dimensions on request
AOH24080
📏 Dimensions on request
472636
📏 Dimensions on request
223255
📏 Dimensions on request
40652S
📏 Dimensions on request